Bellinzoni Idea Black Water Repellent

Instructions

Instruction for use

Surface must be clean, dry, without any trace of dirt; stone to be treated must not contain salts (sulphates, chlorides and nitrates) since their presence reduces the absorption. Stains, mildew, crusting must be scraped off otherwise they will be harder to remove after protection.

Apply IDEA BLACK without any dilution, using a brush, a cloth, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the product to penetrate well into the stone. In this case, apply IDEA BLACK making a gentle pressure on the brush, to facilitate penetration into frames and cavities. Apply necessary quantity up to complete absorption. After 12/24 hours, remove excess of product with an absorbing cloth.

During application and subsequent drying, temperature of the substrate should be between 10 and 30°C. In case of application on floor with underfloor heating system turn off heating and allow the stone to cool completely.

Application tools:

• Brush
• Roll
• Cloth

Suggestion for use and recommendations:

• Do not dilute the product with water or other solvents because the preparation is ready for use.
• The material to be treated must be completely dry.
• Once treated, the stone must be left to dry for 7 days to complete polymerization.
• Before use carefully read the recommendations printed on the tin and perform a preliminary test.

Application surfaces:

Black Marble, Granite, Natural, Engineered & Artificial stones.

Coverage:

For protection of marble and granite polished or grinded after grid 800, with 1 litre of product is possible to treat 15/20 sqm. In case of calcareous stone, limestone, sandstone, concrete, with 1 litre of product it is possible to around 10 sqm.